Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control Panel
• Best results are obtained by using a low speed for normal conditions
and a high speed when odours are more concentrated.
Turn the hood on a few minutes before you start cooking.
The hood should be left on after cooking for about 15 minutes or until
all the odours have disappeared.
The control switches are located on the hood's front panel:
1
2
1. Lights ON/OFF
2. Motor ON/OFF: at switch-on the hood starts atthe level at which it
was switched off the lasttime..
3. Reset filters: this key resets the functions ofthe metal anti-fat filter
saturation (1) andsubstitution of the carbon filter(2). The key hasto be
held pressed for a few seconds.
(1) After 40 hours of activity of the hoodthe F symbol and the speed
functionset flash alternatively in the DISPLAYto indicate that the
metal anti-fat filtersneed to be cleaned.
(2) After 120 hours of activity of thehood the F symbol and the
speedfunction set flash alternatively in theDISPLAY to indicate that
the carbonfilters have to be substituted.
4. DISPLAY: shows the last functioning speed andpossibly the timer.
5. Increase of the functioning speed.
6. Reduction of the functioning speed.
7. Timer: when the timer is activated the hoodremains on at the
functioning speed set for 5minutes and then switches off
automatically.
48
3
4
5
6
7
Werbung
