Dmx-Controlled Operation; Cleaning And Maintenance - EuroLite LED PAR-56 UV Spot Bedienungsanleitung

Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with
the fixture or one fixture with another.
Occupation of the XLR-connection:
The occupation of the Dip-switches is as follows:

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Set the dipswitch 10 to OFF.
If the data is received, the LED will flash.
Channel 1 – Dimmer
Channel 2 – Strobe
DMX Value Characteristic:
0 - 16 Brightness (no strobe effect)
17 - 255 Srobe speed

CLEANING AND MAINTENANCE

DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
15/30 00028027.DOC, Version 1.0