Hach AS950 Grundlegende Installation Und Wartung Seite 12

Figure 4 AWRS anchor bracket locations with mounting dimensions
1 Optional anchor brackets
5.2 Prepare the sampler
5.2.1 Clean the sample bottles
Clean the sample bottles and caps with a brush, water and a mild detergent. Flush the sample
bottles with fresh water followed by a distilled water rinse.
5.2.2 Install a single bottle
When a single bottle is used to collect one composite sample, do the steps that follow. When multiple
bottles are used, refer to
When the bottle is full, the full bottle shut-off stops the sampling program. Install the sample bottle as
shown in Figure 5.
Figure 5 Single bottle installation
12 English
Install multiple bottles
2 Anchor brackets (2x)
on page 13.