Sentiotec WAVE.COM4 SOUND & LIGHT Montage- Und Gebrauchsanweisungen Seite 32

Instructions for use for the user
3.3. PROGRAMMING FUNCTIONS
The following points provide information on the programmability of the LED co-
loured lamp. These settings are stored in a power failure-proof manner.
PROGRAMMING CYCLE TIME
The coloured lamp automatically changes, with the exception of "Manual" mode,
the chroma when the Cycle time ends. This Cycle time is 5 minutes when deli-
vered. It can be adjusted in minute steps.
Proceed as follows:
1. On the operating element with the key
2. Press the keys
3. The programmed cycle time in minutes and the symbol
display.
4. Use the keys
5. By pressing the key
gramming.
PROGRAMMING COLOUR TRANSITION PERIOD
This is the time the LED control takes on change of colour (manual or at the
end of the interval period), for the colour drift from the current to the next colour.
1. On the control element with the MODE key
Farbe" .
2. Press
5
the colour number in the process!)
3. Pressing the key
WORLD OF WELLNESS
and
5 6
and to change the cycle time.
5 6
twice, confirm the input and thus leave the pro-
7
and simultaneously for approx. 3 sec (NB: do not change
6
twice takes you into the setting menu.
7
go to „Automatik-Farbe" .
7
simultaneously for approx. 3 sec.
7
flashes in the
a
go into mode „Automatik
p. 12/20