Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(
14) and clean it with a paint brush
or hand brush.
•
Replace the paper filter bag (
when full (see "Replacement parts/Ac-
cessories" for reordering)
•
Always check the appliance before
use for any obvious faults such as a
defective mains cable, and have these
repaired or replaced.
Filter Cleaning System
If the suction power diminishes, you can
improve the suction power with the help of
the filter cleaning system.
Press the filter cleaning button only
if the fluted filter (14) is inserted.
Insert the mains plug of the device.
1. Move the on/off switch (13) to the "I"
position.
2. Turn the air flow control (4) to the MAX
position.
3. Press the filter cleaning button (2)
down with the help of the handle (18)
and hold it down for 3-4 seconds.
4. Repeat the process two more times.
Maintenance
The device is maintenance free.
Storage
1. Wind the mains cable (7) around the
cable holders (30a+b) on the back of
the device.
2. Wind the vacuum hose (21) around
the motor head (3). The two retaining
brackets (29) fix the vacuum hose in
place.
3. Push the telescopic suction tube (19)
together and insert the suction tube
15)
holder (20) into the accessory holder
(3a) on the motor head (3).
4. The accessory holders (8a) on the cas-
tors (8) and the enclosed accessory
bag (17) are used to store the smaller
accessories.
5. Store the appliance in a dry place (rec-
ommended ambient temperature
15 - 30°C) and out of reach of chil-
dren.
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
GB
IE
NI
CY
13
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
