The motor seems to run too much
Is the lid not closed completely? See underneath.
Is the room termperature hotter than normal?
Has a large amount of fresh food just been added to the freezer?
Is the lid opened often?
Is the temperature control set correctly for the surrounding conditions?
Is the lid seal damaged or deformed?
Is there enough air circulation space around the freezer?
Is the Super Freeze function activated accidentally?
Termperature is too warm
Has a large amount of food just been added to the freezer?
Is the lid opened often?
Is the temperature control set correctly for the surrounding conditions?
Too much ice has formed
Is the lid not closed completely? See underneath.
Is the water drainage plug correctly positioned?
The lid will not close completely
Is there excessive frost or a package preventing the lid from closing?
Are food packages blocking the lid?
Is the lid seal dirty or sticky?
Does the freezer wobble or seem unstable?
The lid is difficult to open
Is the lid seal dirty or sticky?
Is the valve blocked?
If you still need help, please contact your local Sercive Force Centre.
Service or repair
In cases of breakdown or faults, your freezer must be serviced by an authorized Electrolux Service Centre.
Important! Under no circumstances should you attempt to repair the appliance yourself.
Technical Data
Model
Volume (gross)
Volume (net)
Height without/with roller
Width
Depth
Weight
Energy consumption/24h
Freezing capacity
Hold-over time
Rated power
Voltage
Climatic class
Climatic classification
SN
N
ST
T
This appliance complies with the following EC Directives:
73/23/EEC of 19. 02. 1973 Low-Voltage Directive
89/336/EEC of 03. 05. 1989 (including Amendment Directive 92/31/EEC - EMC
Directive)
BNI325
ZFC30JB
Liter
304
Liter
300
Cm
87,6
Cm
105
Cm
66,5
Kg
49
kWh/24h
0,957
kg/24h
17
Hours
32
Watt
87
Volts
230
SN-T
Ambient temperature limits
from +10°C to +32°C
from +16°C to +32°C
from +18°C to +38°C
from +18°C to +43°C
BNI425
ZFC40JB
404
400
87,6
132,5
66,5
56
1,152
19
31
82
230
SN-T
EN
15