Mankenberg UV Originalbetriebsanleitung Seite 27

Original operating manual
spring-actuated pressure control valves UV
15.17 Setting the pressure
Back pressure regulators are normally supplied by us with a relaxed spring. This means that a valve is set at the
factory to the minimum inlet pressure. The required pressure should be set under operating conditions.
15.18 Valves free of oil and grease or silicone
Please pay attention to order and fit only spares free of oil and grease resp. free of silicone.
27
UV-4.X.23.2 Issue 16.08.2023 www.mankenberg.com