Cleaning And Care - Korona 24200 Bedienungsanleitung

Speed Setting
With the rotary switch (4), you can select the operating speed
of the appliance by choosing between low, high or P (pulse
switch).
When operating the appliance in P-position the switch
does not permanently engage. Once released, the appliance
switches off automatically.
Warning: DO NOT operate the appliance longer than 3 minutes
(CO-time) at a time. After a 3 minute use, the blender should be
allowed to cool down for 10 minutes.

Cleaning and Care

Before cleaning, always switch off the appliance and disconnect
it from the mains. Let it completely cool down. Never immerse
the motor block in water. Danger! Electric Shock!
Clean the appliance as soon as possible after use with a damp
cloth and do not use any aggressive cleaning agents.
• Remove the mixing unit/travel jug (1) from the motor block
(3) and empty it.
• Immediately after use, fill the mixing unit/travel cup (1) with
water (not more than 500 ml), and add a bit of dishwashing
detergent.
• Screw the blade assembly (2) properly onto the mixing unit
(1) and attach the assembled unit to the motor block (3).
• Switch to P-position (Auto-Clean Function) for a few
seconds.
• Afterwards, remove the assembled mixing unit/travel cup
and rinse both, mixing unit and blade assembly with clear
water and dry them thoroughly.
28