Stopping The Unit; Power Down; Shut Down; Restarting - Fisher Scientific Isotemp 4100 Bedienungsanleitung

Stopping the
Circulator

Power Down

Shut Down

CAUTION
CAUTION
CAUTION

Restarting

Fisher Scientific
Ensure the stop symbol is highlighted, if not use the arrow keys to navi-
gate to the symbol.
Press . The circulator will stop and the stop symbol will turn into a
start symbol ( ).
Stop Symbol
Press , the circulator will display
enters the standby mode.
Place the circuit protector to the O position.
Using any other means to shut the circulator down can
reduce the life of the compressor.
Always turn the circulator off and disconnect it from its supply
voltage before moving it.
The circuit protector is not intended to act as a disconnecting
means.

Note When quickly restarting, the compressor may take up to 10 min-
utes before it starts to operate.
SP1
20.0°C
System Standby



Section 4 Operation
Menu
In
24.2°C
and
I
O
4-17