bürkert 8186 Bedienungsanleitung Seite 27

Optional settings
LEVEL TRANSMITTER 8186 • 4 ... 20 mA/HART two-wire
6 Set up with the indicating and adjustment module
Function
Max. adjustment
Min. adjustment - Rod/Coax version
Min. adjustment - Cable version
Damping ti
Linearisation
Sensor-TAG
Display
Current output - characteristics
Current output - max. current
Current output - min. current
Current output - failure
Application - rod/coax version
Application - Cable version
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Menu item
Lighting
Language
SIL
HART mode
Factory setting
Like basic adjustment, in addition, special parameters are reset to
2)
default values.
Pointer
The min. and max. values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
2)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset value
Distance, upper dead zone
Distance, supplied sensor length
Distance, lower dead zone
0 s
linear
Sensor
Distance
4 ... 20 mA
20 mA
4 mA
< 3.6 mA
Liquid
Bulk solid
Reset value
No reset
No reset
No reset
No reset
27