Werbung
14. Do not put your fingers or any objects or metal foreign objects inside the product, through
the ventilation grille and other slots, otherwise it may cause electric shock or malfunction.
15. Do not put any objects on top of the device. Vents must not be
covered by a towel, curtain, etc. It may damage the device or cause a fire.
16. The device heats up during operation, do not touch hot parts of the device. Do not touch the
device with wet hands.
17. If the convector gets wet or any object falls through
the convector ventilation grille, turn it off immediately and disconnect it from the mains. Before
relaunching
using the convector, contact the service.
18. Do not place the machine directly below an electrical socket.
19. Always switch the device off using the buttons before disconnecting it from the mains.
20. Do not use this device if it has been dropped.
21. Do not use if there are visible signs of damage to the device.
22. Use the heater on a level and stable surface or attach it to the wall, if provided for by the
manufacturer.
23.All items should be at least 1 meter from the front and sides of the device.
24. Do not insert or allow foreign objects to enter the ventilation or exhaust vents as this may
result in electric shock, fire or damage to the product.
25. A common cause of overheating is dust or lint inside the device. Make sure these deposits
are removed regularly by unplugging the unit and vacuuming the vents and grilles, filters, if
available.
26. Do not use this device in a window as rain may cause electric shock.
27.Do not connect the appliance to a power source until it has been installed in its final position
and placed in the position for use.
28. It is not recommended to use an extension cord with this device.
29.Do not place the cord under carpets, rugs, rugs, etc. Keep the cord away from places where
it may trip over it.
30.Do not use this device with a programmer, timer or any other device that automatically turns
on the heater as there is a risk of fire if the device is covered or placed incorrectly.
31. To avoid the danger of inadvertently resetting the thermal cutout, this appliance must not
be powered by an external switching device, such as a clock, or connected to a circuit that is
regularly turned on and off by the mains.
32. Do not get the device wet. If the device falls into water, disconnect the plug from the socket
immediately. Do not put your hands into the water when the device is plugged in. Before re-
use, it must be checked by an authorized service center.
33. The device should be switched off whenever you put it down.
34. Never turn on the device when the tank is not filled with water.
35. Use only clean, cool water.
36. Do not pour water into the tank above the maximum level.
37. Do not submerge the base of the device.
7
Werbung
