Herunterladen Diese Seite drucken

Domo DO7107S Gebrauchsanleitung Seite 34

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
Cord clamp
After use you can easily store the cord and steam hose by using the cord clamp. Pull out the
clamp, lead the steam hose and the cord around the steam generator and push in the clamp
to lock the cord and steam hose.
Temperature dial
Set the right temperature for the right fabric with the temperature dial.
For synthetic fabrics/silk:
For wool:
For cotton:
For linnen:
BEFORE THE FIRST USE
1.
Remove any stickers or protective foil from the soleplate.
2.
Heat up the iron until the maximum temperature and iron on a damp cloth during a
couple of minutes to remove any possible residues from the soleplate. Iron according to
the instructions in the section «Steam ironing».
Caution:
· During the first use it is normal that a specific odeur escapes from the appliance. This odeur
will disappear after a while.
· Some particles may come out of the soleplate during the first use. This is normal. The
particles are harmless and will disappear after a while.
· When turning on the appliance, the steam generator may produce a pumping sound. This
is normal. This sound indicates that water is pumped into the steam generator.
· While the soleplate is heating up, some steam will be released automatically. This
is also normal and will last for about 3 seconds.
USE
This steam generator offers 2 options: dry ironing or steam ironing. Follow the instructions
below. Also carefully read the ironing tips at the end of this section before using the appliance.
DRY IRONING
1.
Place the iron on the thermal insulation pads of the steam generator.
2.
Plug in the appliance.
3.
Select the desired temperature with the temperature dial, according to the kind of fabric
that needs to be ironed. The temperature indicator will light up and the iron will start
heating up.
34
DO7107S
70<T<120°
100<T<160°
140<T<210°
170<T<225° MAX

Werbung

loading