Sony Ericsson LT18i Bedienungsanleitung Seite 30

Important Information

United States & Canada

THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE

WITH THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE

TO RADIO WAVES.

The LT18a Series mobile phones have been designed to comply

with applicable safety requirements for exposure to radio waves.

Your wireless phone is a radio transmitter and receiver. It is

designed to not exceed the limits* of exposure to radio frequency

(RF) energy set by governmental authorities. These limits establish

permitted levels of RF energy for the general population. The

guidelines are based on standards that were developed by

international scientific organizations through periodic and

thorough evaluation of scientific studies. The standards include a

safety margin designed to assure the safety of all individuals,

regardless of age and health.

The radio wave exposure guidelines employ a unit of

measurement known as the Specific Absorption Rate (SAR). Tests

for SAR are conducted using standardized methods with the

phone transmitting at its highest certified power level in all used

frequency bands. While there may be differences between the SAR

levels of various phone models, they are all designed to meet the

relevant guidelines for exposure to radio waves. For more

information on SAR, please refer to the safe and efficient use

chapter in the User Guide.

The highest SAR value as reported to the authorities for this

phone model when tested for use by the ear is 0.81 W/kg*, and

when worn on the body is 0.95 W/kg* for speech and 1.30 W/kg*

for data calls. For body-worn operation, the phone has been tested

when positioned a minimum of 15 mm from the body without any

metal parts in the vicinity of the phone or when properly used with

an appropriate Sony Ericsson accessory and worn on the body.

For devices which include "WiFi hotspot" functionality, body-worn

SAR measurements for operation of the device operating in WiFi

hotspot mode were taken using a separation distance of 10mm.