Operating Menu "Slideshow Time Settings - Honeywell 013002 Bedienungsanleitung

Operating Manual Touch operating module for MB/MB-Secure
Configure time and cross-fading
Set the display time for an image using the
"Intervall" drop down field.
Use the "Mode" drop down field to set the cross-
fading type.
- STANDARD
Seamless change from image to image.
- HORIZONTAL
The current image will be pushed aside by the
following image.
- VERTICAL
The current image will be pushed up or down by
the following image.
- BLIND
The current image will be faded out and the
following image will be faded in jalousie-like.
After modification there appears a window to
confirm the new settings.
The arrow key "
„Selection" menu.
6.16 Operating menu "Slideshow
time settings"
The "Slideshow Time Setting" button opens the
menu for the time setting of the slideshow.
Time setting is also possible beyond
midnight .
The slideshow is deactivated with
identical start and End time.
Use the arrow keys "
the selected values.
selects the next value.
Press "OK" to save modified values.
returns back to "Selection" menu.
" returns back to
" and " " to set each of
INTERVAL
5S
5S
10S
15S
20S
MODE
STANDARD
STANDARD
HORIZONTAL
VERTICAL
BLIND
Settings modified
Save new settings?
Yes
Slideshow time settings
00 : 00
Start time
00 : 00
End time
29
No
OK