MTR+ RehaBravo Bedienungsanleitung Seite 57

RehaBravo Bedienungsanleitung / Operators Manual
Control of Therapy
RehaBravo has a memory store, where the information for time in use and the
average mA current used for both channels can be read. The device summarizes
the total time of use, up to a maximum of 999 hours and 59 minutes.
This way it is possible to see whether the intensity used by the patient has
been high enough to get a treatment success, or if maybe intensity has been too
strong, so that it was able to produce unpleasant side effects.
„LOCK": If you want to lock the device, please open the battery compart-
ment on the back of the unit. Press the concealed "LOCK"-button using the
end of the lead wire until you hear a double beep. On the LCD-display appears
"L:" and the symbol of the watch. By pressing the "PRG"-button you set the
time to zero and then the device adds up all following application times. If you
should have the desire to close all other programs for the use additionally,
please press the "+/-"buttons after the double beep. This way you add "P" to
the display, so that you can see "L: P + watch-symbol". After the storage of
this choice with the "PRG"-button the device is locked now and adjustments
cannot be changed anymore. To unlock the unit press the concealed switch
once again and you will hear a single beep. The information for time in use and
the average mA current used for both channels can be read. By pressing the
"PRG"-button you bring the device to the Home position and the stored values
are deleted.
57