D) Further Functions Of The Camera In Mode "Test - Conrad Boskon Guard RW12MP Bedienungsanleitung

There, you can switch the respective setting with the up and down arrows and switch to the
next one with the left and right arrows.
Finally, confirm with "OK".
• For the items "Set Clock", "Format", "Default" and "Version", proceed as follows
To change the setting of the respective item, push the button "OK".
For "Set Clock", you can then change the value with the up and down arrows and switch to
the next setting with the left and right arrows. To save, push "OK" again.
For "Format" and "Default", click either the arrow up or down once and confirm with "OK". To
get back, use the button "OK" while "Cancel" is shown or the button "Menu".
• For "Version", only the firmware version is displayed. To get back, push either the button "OK"
or "Menu".

d) Further functions of the camera in mode "TEST"

• If the camera menu is closed, you can manually record pictures or videos depending on set-
ting.
For this, simply push the button "OK" on the remote control.
• Another function is viewing the recorded photographs and videos on the camera screen.
For this, open the menu (button "Menu"), navigate down (button "2abc") to the item "Play-
back" and open it (button "OK").
Use the arrows up "Cancel" and down "2abc" to switch one picture/video forward or back. The
arrow to the left "1" can be used to start a video. Use the arrow to the right "3def" to delete one
or all pictures (delete with the button "OK", back with the button "Menu").
The button "OK" leaves the mode again.
• The last function would be the laser pointer.
Activate it by pushing the button "*" to align the camera.
☞
Always observe all safety notes when operating the laser pointer.
58