Error Codes - Pkm GSP9-6TI Bedienungsanleitung

a) Remove all metal-made objects.
b) Do not use a detergent.
c) Select the longest programme.
d) Start the programme. After 18 - 22 minutes the main-wash cycle begins.
e) Open the door pour 2 cups of white vinegar in the appliance (bottom).
f) Close the door and let the complete programme run. If these measures fail,
repeat the procedure but use
vinegar.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.

9.1 Error codes

❖ Error codes are indicated by the corresponding LED combinations of the
LEDs 1, 2, 3 and 4 (s. fig. and table below).
E
RROR CODE
(LED
COMBINATION
LED 1
flickers slightly
LED 1 and LED 2
flicker slightly
LED 3
flickers slightly
H
OW TO REMOVE SPOTS FROM GLASSWARE
¼
cup (60 ml) of citric acid crystals instead of the
M
EANING
)
Long water inlet
time.
Required
temperature is not
reached.
Overflow / leakage
~
P
➢ Tap is closed.
➢ Water intake is restricted.
➢ Water pressure is too low.
➢ Malfunction of the heating
element
➢ Please contact the aftersales
service.
➢ An element of the appliance
leaks.
➢ Please contact the aftersales
service.
~
158
.
OSSIBLE CAUSES