Indel B SLIM 70 Bedienungsanleitung Seite 35

INSTALLATION
ATTENTION
Install the product away from gas tanks or LPG systems.
ATTENTION
The product is suitable for installation in recreational vehicles only. Not suitable for boats.
The product and accessories are wrapped with buffer materials or attached with adhesive tape to prevent movement of
movable parts during transport: remove them all before installation. Always transport the product in the upright position.
The product was designed and created for recessed installation and conforms to standard dimensions. The product must
always be kept in a vertical position, with the rubber feet on the compressor on the bottom. The compressor can operate at
an inclination of up to 30°. At a greater inclination, the compressor may become damaged.
1. Install the product in a stable cabinet, respecting the ventilation spaces shown in the figure;
2. Place the product partially in the cabinet, leaving 10 cm of space at the top (see detail A);
3. Connect the power supply connector to the 12 V outlet on the vehicle;
4. Slide the product into the cabinet.
33 OFF IS A BRAND OF INDELB
EN