Technical Data - GOK CN60/M Montage- Und Bedienungsanleitung

SHUT-DOWN
Close the gas supply and then the shut-off fittings of the connected consumer equipment.
When the LPG system is not in use, all valves must remain closed.
Close all free connections in the feed lines of the LPG system tightly with a
suitable cap to prevent gas from flowing out.
DISPOSAL
To protect the environment, our products may not be disposed of along with
household waste.
The product must be disposed of via a local collection station or a recycling station.

TECHNICAL DATA

Inlet pressure p
Maximum admissible pressure
Outlet pressure p
d
Nominal flow rate M
Ambient temperature
Refer to the type label of the pressure regulator for more technical data and special
settings!
WARRANTY
We guarantee that the product will function as intended and will not leak during
the legally specified period. The scope of our warranty is based on Section 8 of
our terms and conditions of delivery and payment.
TECHNICAL CHANGES
All the information contained in this assembly and operating manual is the result of product
testing and corresponds to the level of knowledge at the time of testing and the relevant
legislation and standards at the time of issue. We reserve the right to make technical changes
without prior notice. Errors and omissions excepted. All figures are for illustration purposes
only and may differ from actual designs.
DECLARATION OF CONFORMITY
You will find the manufacturer's declaration of conformity for this product on
the website: https://www.gok.de/konformitaetserklaerungen
CERTIFICATE
Our management system is certified according to ISO 9001, ISO 14001 and
ISO 50001, see:
www.gok.de/qualitaets-umwelt-und-energiemanagementsystem.
6 / 6
1 to 16bar
PS 16bar
0.3bar
1.0kg/h – 2.0kg/h
g
-20°C to +50°C
Regler- und Armaturen-Gesellschaft mbH & Co. KG
Obernbreiter Straße 2-18 • 97340 Marktbreit / Germany
Tel.: +49 9332 404-0 • Fax: +49 9332 404-43
E-Mail: info@gok.de • www.gok.de • www.gok-blog.de
Medium pressure regulator Type CN60/M
0.5bar
1.0kg/h – 1.5kg/h
Part no. 01 219 50 d