Connecting External Data Media - Beko B55L 5531 4B2 Bedienungsanleitung

USB RECORDING

Connecting external data media

Notes:
Before connecting the external data
7
medium it is recommended to switch the
television to stand-by mode.
Before removing the external data medium,
7
the television must be switched to standby,
so that no data loss occurs.
Your television features two USB sockets,
7
USB1 and USB2.
USB2 is used to connect data media, which
require an additional power supply.
– for example, external hard disks.
SERVICE
SATELLITE ANT-IN Optic Out USB2 HDMI2
13/18V 5V
max. 500mA max. 50mA
1 Connect the USB2 socket of the television
and the corresponding socket of the data
medium (external hard disk) using a USB
cable;
or
insert the USB plug of the USB memory stick
into the USB1 socket of the television.
Television / User Manual
-------------------------------------------------------------------------------------------
Notes:
The USB1 socket of the television
7
supplies a maximum power of 500 mA
in accordance with USB specifications.
External hard disks which require more
power may therefore only be connected to
the USB2 of the television.
If you use a network cable for external hard
7
disks which have been connected to the
USB2 socket of the television, this network
cable must also be disconnected from
the power supply when the television is
switched off.
External data media may not be
7
disconnected from the television while files
on the data medium are being accessed.
Settings for USB recording
Selecting the menu
1 Open the menu with »MENU«.
2 Select the menu item »USB RECORDING«
with »
confirm.
– The »USB RECORDING« menu appears.
« or » « and press »OK« to
V Λ
USB RECORDING
PRnP
Disk Management
Safely Remove Disk
Format Partition
Disk
STORE N GO
Partition Partition 1 (C)
PR Drive
Used (MB) 1249
Total (MB) 38145
MENU
Back
xx.xx.xxxx
15:46
OK
%3
EN 80 / 35