✓ Install it in an appropriate place (see "Installation instructions").
✓ Leave the doors open as little time as possible.
✓ To ensure that the appliance operates properly, clean the condenser
regularly (see "Maintenance").
✓ Regularly inspect the door seals and ensure that they are still closing
properly. If this is not the case, contact your after-sales service.
✓ The combination of shelves is recommended for energy to be used as
efficiently as possible by the refrigeration unit. Any change to this
arrangement may impact the energy consumption of the device.
✓ The appliance's thermostat is electronic and allows you to set the
temperature between 5 and 20 degrees.
For wine storage, it is recommended that you set your appliance to 12
degrees.
This temperature can be adapted according to the type of wine stored.
Setting the temperature above 12 degrees will reduce the energy
consumption of the appliance.
Setting the temperature below 12 degrees will increase the energy
consumption of the appliance. Some models allow you to set different
temperature levels in the same cellar. The appliance ensures that the
temperature is maintained as long as it is in operation and used under
normal conditions.
The temperature inside the appliance can be influenced by many factors:
room temperature, exposure to the sun, number of door openings and the
number of bottles stored... Slight changes in temperature are perfectly
normal.
Trouble shooting
• Any electrical work should be carried out by a qualified and skilled
technician.
• The appliance should be repaired by an accredited repair centre, using only
36