Using Your Appliance; Installing The Appliance; Measuring Unit; Filter Installation - Krups FULLY AUTOMATIC EA8918 Bedienungsanleitung

KR_FULLY-AUTO_EA89_CONNECTEE_8080016824.qxp_Mise en page 1 16/05/2017 10:01 Page23
The mobile app facilitates the initial installation of the machine and the initial settings.
using the app
Many functions are offered via the app:
• Running remote preparations,
• Management of a favourites library and a cellar book,
• Access to the account and information on the machine,
• Access to news and information about the world of coffee,
• Access to a user guide with tutorials and videos in order to take advantage of all the machine's potential,
• Quick access to the after-sales service in the event of a query or a problem concerning your appliance or the app.
You will be able to discover all these functions by browsing the app (whether you are connected to your machine or
not).
Do not hesitate to connect to the app as often as possible in order to view news and regularly monitor your machine.

uSING yOuR APPLIANCE

INSTALLING THE APPLIANCE

Warning: Connect the appliance to an earthed 230 V mains socket. Failure to do so means that you run the risk
of fatal injury due to electricity!
Respect the safety guidelines indicated in the "Safety guidelines" booklet.
Switching ON the appliance
Switch on the appliance by pressing the ON/OFF button until "Hello" appears on the screen Fig. 1. Follow the
instructions provided by your appliance.
Initial settings
When using the machine for the first time, you will be prompted to configure various settings. Follow the indications
displayed on the screen. The aim of the following paragraphs is to give you a few visual cues.
Here are the first settings required:
Language
Select a display language by pressing the arrows until the language of your choice appears. Press "OK" to confirm.

Measuring unit

You can set the unit of measurement for volume to ml or oz.
Date and time
To set the time, press the desired time format (24 hours or AM/PM).
Auto-off
It is possible to program the time at which you want your machine to switch on automatically. This setting can be
adapted as you wish: daily, weekly or weekend. Select the time at which you want it to start automatically following the
time format selected earlier.
You can also select the length of time after which your appliance will switch off automatically in order to optimise your
energy consumption.
Rinsing the coffee circuit
You can choose to activate it or not when switching on the machine. This allows you to ensure the quality of the coffee
in the cup in order to avoid the presence of residue.

Filter installation

When switching on for the first time, the appliance asks if you want to install the filter. If you wish to do so, and if the
hardness of your water requires it, select "YES" and follow the instructions on the screen.
Installing the cartridge in the appliance: Screw the filter cartridge into the bottom of the water tank using the
accessory supplied with the cartridge. Fig. 4
Set the month when the cartridge is fitted (position 1 on the illustration, left side figure in the opening) by turning the
grey ring located on the upper end of the filter. The month when the cartridge should be replaced is indicated in position
2 on the illustration. Fig. 5.
Put a container of 0.6 l under the steam exit. Fig. 6.
The machine must be primed whether the filter has been installed or not. This means that the water circuits have to be
23