Beamz Light Package 2 Multipoint Laser G-50mW R-80mW Gebrauchsanleitung Seite 4

LASER LIGHT AVOID DIRECT EYE EXPOSURE
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard "For Safe Use of
Lasers", available from "www.laserinstitute.org". Many local governments, corporations, agencies, military and others, require
all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the International Laser
Display Association, www.laserist.org.
Notices
 Non-professional do not dismantle or repair the laser lighting. when there is a problem, please inquire with the professional
or contact with the local dealer;
 Do not exposure in the wet or dirty condition;
 Prevent the laser lighting from strong vibration or punch;
 Prevent other subject enter into the lighting;
 Ensure the fan is not blocked;
 Before power on, be sure electric outlet is connected well with the socket;
 Do not turn on and turn off frequently , avoid to turn on the power for a long time;
 Please power off the lighting for 15 minutes after running two hours, ensure that the laser system is in well cooling state;
 Do not looking at the laser source using telescope
 Do not touch the laser lighting by wet hand and forcefully pull the power line;
 The distance between lighting and casting medium should be more than 1 meters;
 Do not dismantle the lighting;
 Please directly contact with the local dealer when the trouble occurred;
 When to be transported, use the original package to avoid shocking;
Maintenance
Please clean the lens regularly. Do not do it using the wet cloth or other chemical. the clean times is depend on the using
frequency and surrounding condition; it is recommended that should be cleaned every 20 days;
Please clean the lighting surface and engine outlet regularly.
Statement
All the user should abide by the above waning items and operation instructions, otherwise any trouble due to incorrect
operation is out of warranty.
—4—