Safety Instruction; Technical Specification - Beamz Light Package 2 Multipoint Laser G-50mW R-80mW Gebrauchsanleitung

LED Moon Flower sound controlled

1. Safety Instruction

■ Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they
also receive this instruction booklet.
■ Unpack and check carefully there is no transportation damage before using the unit.
■ Before operating, ensure that the voltage and frequency of power supply match the power requirements
of the unit.
■ It's important to ground the yellow/green conductor to earth in order to avoid electric shock.
■ The unit is for indoor use only and use only in a dry location.
■ The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces.
Be sure that no ventilation slots are blocked.
■ Disconnect mains power before fuse replacement or servicing.
■ Replace fuse only with the same type.
■ Make sure there are not flammable materials close to the unit while operating as it is fire hazard.
■ Use safety cable when fixes this unit.
■ In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repair carried out by unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center and always use the same type spare parts.
■ Do not touch any wire during operation as high voltage might be causing electric shock.

2. Technical Specification

Supply Voltage:
Power:
Adapter input:
LED:
Function：
Dimensions per unit:
Weight (per unit):
Please read the instruction carefully which including important
information about the installation, operation and maintenance.
AC110～240V 60/50HZ
20W
DC12V 1A
5mm×60LEDs for RGBAW 5 color
sound active and Auto working mode
265x145x107mm
1Kg