Technical Data; Ec Declaration Of Conformity; Paper Shredder Securio C18 - HSM securio C18 Betriebsanleitung

9 Technical data

Cutting type
Cut size (mm)
Security level DIN 32757 - 1
Cutting capacity* (sheets), A4
Noise level (Idle running/ load)
Weight
Intake width
Cutting speed
Power supply
Power consumption
with max. number of sheets
Operating mode
Operating time
Idle time
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.

EC Declaration of Conformity

The manufacturer HSM GmbH + Co. KG, Austraße 1-9, 88699 Frickingen / Germany hereby declares that the ma-
chine, referred to here as
document shredder Securio C18
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 55014-1:2006 + A1:2009
• EN 61000-3-2:2006 + A1:2009
• EN 62233:2008
• EN 61000-4-4:2004
• EN 61000-4-6:2007 + Corr. Aug. 2007
• EN 60950-1:2006 +A11:2009
Frickingen, 10.01.2012
05/2012
70 g/m 19 - 20
2
80 g/m 15 - 16
2
55 - 58 dB(A) / 55 - 59 dB(A)
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 61000-3-3:2008
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 61000-4-5:2006
• EN 61000-4-11:2004
i.V. Hubert Kötzinger - Head of Environmental Engineering Product Development
SECURIO C 18
Strip cut
5.8 3.9
2 2
14 - 15
11 - 12
9.8 kg
230 mm
50 mm/s
215 - 240 V, 50 Hz
110 - 130 V, 60 Hz
360 W
Brief operation
7 min
16 min
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
365 x 280 x 542
english
Cross cut
3.9 x 30 1.9 x 15
3
10 - 11
8 - 9
55 - 58 dB(A) / 57 - 63 dB(A)
11.0 kg
25 l
4
8 - 9
6 - 7
17