Changing Stored Analogue Channels - Beko B40K 590G Kurzanleitung

SETTING FURTHER CHANNELS
Changing stored analogue
channels
If channels were stored with the automatic
channel search during the tuning of the
television channels, you can delete them. You
can also change or enter the name of a channel
and skip a channel.
Selecting channel lists
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Source« with »
<
» « and press » « to confirm.
V
– »Source« menu is active.
4 Select the line »Channel Editor« with »
or » « and press »OK« to confirm.
Λ
– »Channel Editor« menu is displayed.
Note:
Additional operations are explained in the
7
following sections.
Deleting channels
1 In the »Channel Editor« menu, select the
channel(s) you want to delete with »
< >
» «, » « or » «, and highlight the televi-
Λ
sion channel by pressing »OK«.
–Channel is marked with »✔«.
Note:
If several TV channels are to be deleted,
7
press » «, » «, »
V Λ
these and mark each one with »OK«.
2 Activade the »Tools« menu with »
low).
3 Select the line »Delete« with »
and press »OK« to confirm.
4 To confirm deletion process, select the op-
<
tion »OK« with » « or »
to confirm;
or
to cancel deletion process, select the option
<
»No« with » « or »
confirm.
5 Press »EXIT« to close the menu.
Television / User Manual
«, »
V Λ
>
« or
«
V
«,
V
< >
« or » « to select
« (yel-
« or » «
V Λ
>
« and press »OK«
>
« and press »OK« to
-----------------------------------------------------
Entering the analog channel names
(maximum 8 characters)
1 In the »Channel Editor« menu, select the
channel you want to rename with »
<
» «, » « or »
Λ
ing »OK«.
– Channel is marked with »✔«.
2 Activade the »Tools« menu with »
low).
3 Select the line »Rename« with »
«,
and press »OK« to confirm.
4 Delete the current channel name step-by-
step with » « (red).
5 Select the required character with »
<
» «, » « or »
Λ
character with »OK«.
– Using »Shift« ➡ »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
6 Confirm the channel name with » «
(green).
Note:
To enter other channel names, repeat steps
7
1 to 6.
V
>
«, and highlight it by press-
« (yel-
« or »
V
V
>
« and move to the next
69 / 78 EN
«,
«
Λ
«,