PICTURE /SOUND SETTINGS
Picture settings
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3 Select menu item »Picture« with »
and press »
V
– »Picture Settings« menu is active.
Settings > Picture
Picture
Sound
Picture Format
Picture Mode
Backlight
Advanced
Restore default display settings
Change Area
4 Select the required line »Picture Format«,
»Picture Mode« or »Backlight« with »
»
« and press »OK« to confirm.
Λ
Select the option with »
Press »BACK
menu.
Note:
Other settings are available under »Ad-
7
vanced«.
5 Select the line »Advanced« with »
»
« and press »OK« to confirm.
Λ
6 Select the required line/function with »
or »
« and press »OK« to confirm.
Λ
Select the value/option with »
and press »OK« to confirm.
Press »BACK
menu.
7 Press »EXIT« to end the setting.
24 / 78 EN
«, »
V
<
« or »
« to confirm.
Tuesday
xx xxx xxxx
Source
TV
Timer
Parental
16:9
Natural
Ec0
Back
BACK
<
>
« or »
«.
« to return to »Picture«
<
« or
V
<
« or »
« to return to »Picture«
<
-----------------------------------------------------------
Advanced picture settings
The "advanced picture settings" are in principal
digital image improvements which, however,
«,
Λ
should be only used when necessary when
picture quality and transmission is excellent.
>
«
They may well improve the display with poor
material, but may adversely affect the display
where transmission and picture quality are
excellent.
»Backlight« – Manual setting for back light-
7
ing (only active if dynamic back lighting is
switched to "OFF"). This setting also directly
impacts power consumption.
»Vibrant Colour« – Increases the colour
7
contrast and the contrast adjustment. This
setting is mostly too strong for use with nor-
mal pictures and should only be used where
Exit
EXIT
necessary (low or off) otherwise nuances in
the image can be suppressed.
« or
V
»Gamma« – This setting establishes which
7
brightness value should be displayed for
which digital transmission value. Most
recordings are transmitted with a gamma
value of 2.2 (all Windows PCs and newer
PCs with a MAC operating system work
with this, older MAC systems and transmis-
sions without colour profile mostly operate
with a gamma value of 1.8).
»Dynamic Contrast« – The function dynami-
7
cally and optimally adjusts the contrast for
«
V
the respective picture content by analysing
images and then altering this depending in
>
«
a change in contrast. This increase the con-
tract, however may also reduce the visible
brightness levels in the picture.
»Film mode« detects and processes feature
7
films automatically for all channel sources.
This means you will always receive an
optimal picture.
This functions in the modi 480i, 576i and
1080i in TV playback and for other chan-
nel sources.
If the »Film mode« is switched on for
programmes without a feature film signal,
minor problems such as picture freeze,
defective subtitles or fine lines in the picture
could occur.
Television / User Manual