Displaying Signal Information - arcelik A32K 590G Benutzerhandbuch

SETTING FURTHER CHANNELS
Creating a list of favourites - analog
channels
You can select your favourite channels and save
them in up to four lists (FAV1 to FAV4).
1
In the »Channel Editor« menu, select the
channel(s) you want to add in the favor-
ites list with » «, »
V
highlight the television channel by pressing
»OK«.
–Channel is marked with »✔«.
2
Activade the »Tools« menu with »
low).
3 Select the line »Add To Fav.« with »
» « and press »OK« to confirm.
Λ
–»Add to Fav.« menu is displayed.
4
Select the favorite list you want to add the
selected channels with »
store with »OK«.
– The channels are marked in the Channel
Editor with »❶«, »❷«, »❸« or »❹«.
– You can add the same channel in more
than one favourites list.
– Each favourite list can contain maximum
255 channels.
Notes:
You can delete channels from the favou-
7
rites list. Press »
favorites list the channel is in with »
» « and press »OK« to confirm. Select the
Λ
channel(s) you want to delete with »
< >
» «, » « or » «, and highlight the channel
Λ
by pressing »OK«.
Press » « (yellow) and select the line
»Remove from Fav.« with »
confirm with »OK«. The channel you have
selected is now deleted from the favorites
list.
When a channel stored in the favourite
7
channel list is deleted channel order in the
favourite list is updated.
5 Press »EXIT« to close the menu.
< >
«, » « or » «, and
Λ
« (yel-
« or
V
« or » « and
V Λ
« (yellow), select the
« or
V
«,
V
« or » « and
V Λ
-----------------------------------------------------

Displaying signal information

(only for digital television channels)
1
Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3
Select the menu item »Source« with »
<
» « and press »
V
– »Source« menu is active.
4
Select the line »Advanced« with »
» « and press »OK« to confirm.
Λ
5 Select the line »Signal Information« with
» « or » « and press »OK« to confirm.
V Λ
– »Signal Information« menu is displayed.
Notes:
Signal information changes depending on
7
the current source.
The more »Frequency« and »Signal
7
Strength« bar stretches to the right, the more
signal you have.
The signal level not only depends on your
7
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
6 Press »EXIT« to close the menu.
«, »
V Λ
>
« or
« to confirm.
« or
V
ENGLISH
«,
79