Device Control; Switching The Device To Standby - arcelik A32K 590G Benutzerhandbuch

USING EXTERNAL DEVICES

Device Control

You can determine how the remote control of
your television will control the external device.
1 Press » « and use »
either one from »HDMI1«, »HDMI2« and
press »OK« to confirm.
2
Open the menu with »MENU«.
3 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
4 Select the menu item »Source« with »
<
» « and press »OK« to confirm.
Settings > Source
Picture Sound
Device
Remote Behavior
Put device into standby
Change Area Select
5
Select the line »Remote Behavior« with »
or » «.
Λ
6 Select control type (»Pass-Through«, »Deck«
or »Zap«) with »
Notes:
»Pass-Through« is included in the menu as
7
an option that can be selected in every
device type. »Deck Control« and »Tuner
Control« options change depending on the
external device connected.
Apply trial and error method to determine
7
the functions of the remote control buttons
for the selected control type.
Refer to the user manual of the DIGILINK
7
compatible device for its functions.
7
Press »EXIT« to end the setting.
62 ENGLISH
< >
« or » « to select
«, »
V
>
Tuesday
xx xxx xxxx
Source TV Timer Parental
- - - -
None
< >
« or » «.
---------------------------------------------------------------

Switching the device to standby

This option switches the connected external
device to standby.
1 Press »
either one from »HDMI1«, »HDMI2« and
press »OK« to confirm.
2
Open the menu with »MENU«.
«, 3 Select menu item »Settings« with »
Λ
<
» « or »
« or 4 Select the menu item »Source« with »
<
» « and press »OK« to confirm.
5
Select the line »Put device into standby«
with »
V
confirm.
– The connected external device is switched
off.
Back
BACK
«
V
< >
« and use » « or »
>
« and press »OK« to confirm.
« or » « and press »OK« to
Λ
« to select
«, » «,
V Λ
>
« or