Temperature Measurement - VOLTCRAFT VC191 Bedienungsanleitung

i) Temperature measurement
Do not get the temperature probe wet!
1. Set the function dial to °C°F.
2. Short press the SEL/PEAK button to select a unit
of measurement, "°C" or "°F" will show on the
display.
3. Connect the K-type thermocouple to the terminals.
- "TEMP +" plug to the
- "COM -" plug to the COM terminal.
4. Measure the temperature at the probe tip.
- "OL" will appear on the display when the DMM
is turned on.
- The measured temperature should be < 400 °C
/ 752 °F (°F = °C × 1.8 + 32)
5. When finished measuring, disconnect the test
leads and switch the power OFF.
terminal.
57