Medion LIFE P15052 Bedienungsanleitung Seite 113

LÖSCHEN
Select the transponder that you want to delete from the list as de-
scribed above and press the green button. Confirm the prompt by
pressing YES.
ADD
Press the red button to add a new transponder. The setting op-
tions here are the same as for EDIT.
LNB POW
Set the LNB power here.
ER
Enter the oscillator frequency for your LNB type here. The default
LNB TYPE
setting is UNIVERSAL.
22KHZ
Set the sound here. The default setting is AUTO.
TONE
TONE If your satellite system requires a tone burst, you can set it to
BURST BURST A or B here.
DISEQC If you have connected multiple LNBs or a DiSEqC switch to your
1.0/1.1 satellite aerial, set the LNB you require here.
If your satellite antenna is controlled by a motor, press  to se-
MOTOR
lect the DiSEqC version. Press the O K button to define the posi-
tion of the antenna.
The following UNICABLE settings can be made here.
SLOT
FRE
QUENCY
UNICABLE
PIN
LNB
VERIFY
28
Setting
This is where you specify a particular channel.
You can set the centre frequency here.
You can set the satellite position here.
Select the LNB here.
Press the OK button to accept the settings.