BRAYER BR2832WH Bedienungsanleitung Seite 6

6 EN
• Take products out of the deep fat fryer immediately
after frying; a long products keeping in the operating
deep fat fryer may cause their or frying fat ignition.
• In case of products or frying fat ignition, take the
power plug out of a socket immediately, cover the
deep fat fryer with a thick, and, if possible, damp and
non-flammable cloth and take additional fire spread
prevention measures. DO NOT EXTINGUISH THE
FLAME WITH WATER!
• For deep fat frying use only the basket.
• To fill the basket with products, always take it out of
frying fat, after filling the basket with products, sink it
carefully into frying fat, beware of hot fat splashes.
• If products fall out of the basket, do not take it out
with any metal objects that could damage the deep
fat container coating, use kitchen accessories for
non-stick surfaces.
• Unplug the unit after usage or before cleaning. When
unplugging the deep fat fryer , hold the power plug
and carefully remove it from the mains socket, do not
pull the power cord, as this can lead to its damage
and cause a short circuit.
• Do not touch the unit body, the power cord and the
power plug with wet hands.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the authorized service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.