Device Description; Control Panel; Initial Use; Usage - Beurer LB 300 Plus Gebrauchsanweisung

5. DEVICE DESCRIPTION

The associated drawings are shown on page 3.
Air humidifi er

Control panel

1
LED light ring
2
Air outlet
3
Motor unit
4
Filter
5
Water level sensor
6
"Max." mark
7
Filter holder
8
Water tank
9
Air inlet
10

6. INITIAL USE

1. Open the cardboard packaging.
2. Remove the device from the top of the box without opening the fi lm bag.
3. Remove all fi lms and adhesive strips. Remove the fi lter
the fi lter") and take it out of the plastic fi lm. Then re-insert the fi lter
4. Check the device, mains plug and cable for damage.

7. USAGE

7.1 Starting use

Step 1: Position the air humidifi er
1. Place the air humidifi er on a stable, horizontal and level surface to
prevent vibrations and noise. Never move the air humidifi er during use.
2. Set up the air humidifi er in such a way that provides 30 cm clearance
on all sides.
3. Make sure that the air inlet
Control panel
ON/OFF button
11
Display
12
(shows current relative humidity, fan speed and timer duration)
Target humidity indicator
13
Target humidity button
14
Timer button
15
Fan speed button
16
NIGHT indicator
17
(lights up when NIGHT mode is active)
AUTO indicator
18
(lights up when AUTO mode is active)
Filter drying indicator
19
(lights up when fi lter drying function is active)
Filter change indicator
20
(lights up when fi lter change is necessary)
Water tank indicator
21
(lights up when the water tank is empty/needs to be refi lled)
and air outlet are never blocked.
10 3
23
from the device (see section "8.3 Changing
5
into the device.
5