ZTE Blade A33S Kurzanleitung Seite 7

WARNING!
Use only ZTE-approved chargers and USB cables. The
use of unapproved accessories could damage your
phone or cause the battery to explode.
1. Connect the adapter to the charging jack. Ensure that
the adapter is inserted in the correct direction.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In this
case, try again after charging the phone for at least 20
minutes. Contact the customer service if you still cannot
power on the phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
 Press and hold the Power key to turn on your phone.

To power off, press and hold the Power key until the
power off/restart menu appears, and then touch
>
NOTE:
If the screen freezes or takes too long to respond,
reinstall the battery and power on again.
.
5