Würth 5700 400 Originalbetriebsanleitung Seite 11

OBJ_BUCH-1872-001.book Page 11 Tuesday, March 26, 2013 3:19 PM
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
 In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 Use only original Würth batteries with the volt-
age listed on the nameplate of your power
tool. When using other batteries, e. g. imitations, recon-
ditioned batteries or other brands, there is danger of injury
as well as property damage through exploding batteries.
Additional Safety and Working
Instructions
 Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one's health and
cause allergic reactions, lead to respiratory
infections and/or cancer. Materials containing
asbestos may only be worked by specialists.
• Provide for good ventilation of the working place.
• It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
 Prevent dust accumulation at the workplace.
Dusts can easily ignite.
 Before any work on the machine (e. g., main-
tenance, tool change, etc.) as well as during
transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional
actuation of the On/Off switch can lead to injuries.
 The battery is supplied partially charged. To
ensure full battery capacity, completely
charge the battery in the battery charger
before using for the first time.
 The battery is equipped with a NTC tempera-
ture control which allows charging only within
a temperature range of between 0 °C and
45 °C. A long battery service life is achieved in
this manner.
 Read the operating instructions of the battery
charger.
 Apply the power tool to the screw only when
it is switched off. Rotating tool inserts can slip off.
 Adjust the gear switch only when the machine
is at a complete stop.
 Always push the gear selector and turn the
operating mode selector switch through to the
stop. Otherwise, the machine can become damaged.
 To save energy, only switch the power tool on when using
it.
 Use only original Würth accessories.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
BS 14-A Compact/BS 18-A Compact/
BS 14-A Compact Combi/
BS 18-A Compact Combi:
Cordless screwdriver/Combination
cordless drill
Grey-marked area: Handle (insulated
gripping surface)
Art. No.
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
Reaction direction
Drilling and screwdriving
11