NORAUTO NS-X2800 DBT Bedienungsanleitung Seite 92

BLUETOOTH (R) OPERATION
EN
Before using
Bluetooth
Pairing a New Device
Connect
Bluetooth Phone
1. Main Menu
2. Current Mode
Indicator
3. Bluetooth Status
indicator
4. Setup
5. Bluetooth Music
6. Call Log
7. Phone Book
92
1 2
10
9
8
Before you can use a Bluetooth device to make hands-free
calls or stream audio. it must be authenticated. This is also
referred to as "pairing" a device.
The unit broadcasts the pairing signal constantly when
no devices are currently connected. Complete the pairing
sequence from your Bluetooth device. Refer to the owner's
manual for your device for more details. The device name is
"NS-X2800DBT". The unit can be in any mode of operation
when pairing is performed. On certain phones, pairing may
need to be done more than once.
The head unit will automatically connect to the last
connected device when the connect feature is set to Auto
connect On. If the connect feature is set to Auto Connect
Off, the head unit will not automatically connect to any
device.
From the main menu, touch the Bluetooth on the screen.
Bluetooth icon will appear anytime a Bluetooth device is
connected.
Press
Displays current mode of operation.
When Bluetooth is On and a Bluetooth device is being
paired, the indicator will flash. When Bluetooth is On and a
phone is connected to the unit, the indicator will illuminate
steady.
Press "SETUP" to access Bluetooth settings.
Press MUSIC to transfer audio between the unit and mobile
phone.
Press the Call Log to show( Dialled, Missed and Received
Calls ).
Press "CONTACTS" to access phone book menu.
7 6
icon to return to Main Menu screen.
3
5 4