Worx WX425 Originalbetriebsanleitung Seite 8

aware of the time it takes for the blade to stop
after switch is released.
ADDITIONAL SAFETY RULES
FOR YOUR CIRCULAR SAW
1. Use only saw blades recommended by the
manufacturer, which conform to EN 847-1, if
intended for wood and analogous materials.
2. Do not use any abrasive wheels.
3. Use only blade diameter(s) in accordance with
the markings.
4. Identify the correct saw blade to be used for the
material to be cut.
5. Use only saw blades that are marked with a
speed equal or higher than the speed marked
on the tool.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
8
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
Circular saw
1. SOFT GRIP HANDLE
2. LOCK OFF SWITCH
3. BEVELTRAC
TM
4. ON/OFF SWITCH
5. AUXILIARY HANDLE
6. SPINDLE LOCK BUTTON
7. BASE PLATE ANGLE SCALE
8. BASE PLATE BEVEL LOCK
9. PARALLEL GUIDE
10. BASE PLATE
11. LOWER GUARD
12. SAW BLADE*
13. BLADE BOLT
14. LOWER GUARD LEVER
15. VACUUM ADAPTER
16. DEPTH OF CUT LOCK LEVER
17. HEX KEY STORAGE AREA
18. PARALLEL GUIDE LOCK KNOB (SEE D1)
* Not all the accessories illustrated or
described are included in standard delivery.
EN