FAFREES F26 CarbonX Bedienungsanleitung Seite 24

Motor Drive Ensure hub motor is spinning smoothly and motor bearings are in good working
Assembly and order.
Throttle Ensure all power cables running to hub motor are secured and undamaged.
Make sure the hub motor axle bolts are secured and the torque arm, torque arm
bolt, and torque washers are in place.
Battery Ensure battery is charged before use.
Ensure there is no damage to battery.
Lock battery to frame and ensure that it is secured.
Charge and store bike and battery in a dry location, between 0℃– 40℃ (32℉–
104℉).
Electrical Cables Examine connectors to ensure that they are completely seated and dry of any
debris or moisture.
Inspect the cables and cable housing.
Make sure the brake, tail, and headlights are all adjusted correctly, working, and
not blocked.
Accessories Make sure that every reflector is fitted correctly and isn't covered up.
Make sure that the bike's other components are securely fastened and working as
intended.
Check the safety equipment, including the helmet.
Make sure the mounting gear is securely fastened if the vehicle has a front rack,
rear rack, basket, etc.
Make sure the taillight and the power cable are securely fastened if the vehicle has
a rear rack.
Make sure the fender mounting hardware is securely fastened if the vehicle has
fenders.
Make sure that the fenders are free of cracks and holes.
EN 21