KERN KFC-TM Betriebs Und Installationsanleitung Seite 108

Acknowledge with
active digit flashes.
Enter upper limit for the weight deviation and confirm by
.
The weighing balance returns to menu "ErruPP".
Use the navigation keys  to select setting „ErrLoW".
Acknowledge with
active digit flashes. The indicator "LO" appears.
Enter lower limit for the weight deviation and confirm by
.
The weighing balance returns to menu "ErrLoW".
Press repeatedly
Finished the setting works, the weighing balance will be
ready for check counting.
2. Start tolerance check
 Place the weighed material and check by means of the tolerance marks / acoustic
signal if the weighed material is within the defined tolerance.
Load below specified
tolerance
42
. The numeric input appears, the
. The numeric input appears, the
button to exit menu.
Load within specified
tolerance
Load exceeds specified
tolerance
TKFC-TM-A-BA_IA-e-2212