3.2. Setting up the device safely
• Set up and operate all the components on a stable, level and vibra-
tion-free surface to prevent the product from falling.
• Do not subject the product to knocks and vibrations. Knocks and
vibrations may damage the sensitive electronics.
• Do not place the product near heat sources (e.g. heaters) that
could affect it.
• Do not place naked flames (e.g. lit candles) on or near the product.
• Make sure that the vents are never covered so as to ensure that
there is always adequate ventilation.
• Do not place any objects on the cables as they may be damaged.
• Maintain a minimum distance of approx. 10 cm between the prod-
uct or mains adapter and any walls. Ensure adequate ventilation.
• Do not place liquid-filled containers, such as vases, on or near the
device. The container may tip over and the liquid may impair the
electrical safety of the product. Keep the device away from mois-
ture and from water in droplet or spray form.
• In order to prevent malfunctions, avoid knocks, dust, heat and di-
rect sunlight. The operating temperature is 5-35°C.
• Do not use the product outdoors as it could be damaged by rain,
snow, etc.
• To avoid malfunctions, keep the product at a distance of at least
one metre from high-frequency or magnetic interference sources
(televisions, loudspeakers, mobile telephones, etc.). If any malfunc-
tions occur, set up the device at a different location.
• Major changes in temperature or fluctuations in humidity can
cause moisture to build up within the product due to condensa-
tion – this can cause an electrical short circuit.
3.3. Mains connection
• Connect the mains adapter only to a power socket (AC 100–240 V
~ 50/60 Hz) that is easy to reach and close to the place where you
have set up the device. The socket outlet must be freely accessible
so that you can unplug the device from the mains quickly if neces-
sary.
• Only use the power cable supplied with the product. Never try to
DE
EN
TR
37 of 90