Inhaltsverzeichnis
Werbung
Installation and Operation Manual
X-CM-QmB-eng
Part Number: 541B029AAG
July, 2018
2-1 General
2-2 Receipt of Equipment
2-3 Recommended Storage Practice
2-4 Return Shipment
All manuals and user guides at all-guides.com
When the equipment is received, the outside packing case should be
checked for damage incurred during shipment. If the packing case is
damaged, the local carrier should be notified at once regarding his liability. A
report should be submitted to the nearest Brooks Instrument location listed
on the Global Service Network page on our website:
GlobalSupportCenters
Remove the envelope containing the packing list. Carefully remove the
instrument from the packing case. Make sure spare parts, accessories and
documentation are not discarded with the packing materials. Inspect for
damaged or missing parts.
If intermediate or long-term storage is required, it is recommended that the
instrument be stored in accordance with the following:
a. In the original vacuum bag and shipping container.
b. In a sheltered area with the following conditions:
Ambient temperature 70
c. Relative humidity 45% nominal, 60% maximum, 25% minimum.
Upon removal from storage a visual inspection should be conducted to verify
the condition of equipment is "as received".
Prior to returning any instrument to the factory for any reason, visit our
website for instructions on how to obtain a Return Materials Authorization
Number (RMA #) and complete a Decontamination Statement to accompany
it: BrooksInstrument.com/Service. All instruments returned to Brooks also
require a Material Safety Data Sheet (MSDS) for the fluid(s) used in the
instrument. Failure to provide this information will delay processing of the
instrument.
Instrument must have been purged in accordance with the following:
QmB Series IP40, IP66, IP66XP
BrooksInstrument.com/
C (160
F) maximum and 0
0
0
C (32
F) minimum.
0
0
2-1
Werbung
Inhaltsverzeichnis
