Product Description; Filling With Water - Concept ZN8091 Bedienungsanleitung

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.

PRODUCT DESCRIPTION

1. Filling hole cover
2. Steam volume regulator
3. Spray button
4. Steam button
5. Temperature controller with heating
indicator
6. Supply cable joint
7. Operation indicator (ZN8092)
Automatic OFF indicator (ZN8091)
8. Ironing surface
9. Water tank
10. Self-clean button
11. Spray nozzle
Accessories
A Water tank
OPERATING INSTRUCTIONS
Do not leave the unit unattended if it is connected to the power source.
Remove all the stickers and packaging from the ironing surface before the first use.
Before the first ironing, try the unit on a piece of old fabric to make sure the ironing
surface and water tank are perfectly clean.
The unit may emit a slight odor during the first use. This smell will vanish after a short
time.

FILLING WITH WATER

1. Unplug the unit from the power source.
2. Set the steam volume regulator to minimum (OFF)
3. Open the filling hole cover (Fig. 1) and fill the tank with water. Use only distilled
or boiled water. Don't fill the tank with a liquid other than water. Do not put any
additions in the water. There is a risk of damage to the unit. The capacity of the
tank is approximately 350 ml. Do not exceed the maximum marked water level.
4. Close the filling hole cover.
22
All manuals and user guides at all-guides.com
A
3
7
1
11
EN
5
4
2
9
8
Fig. 1
ZN8091, ZN8092
6
10