Using The Alarm - LENCO CR-630 Bedienungsanleitung

Resetting the radio will delete all the tuned DAB+ stations and all the preset memory stations in FM
and DAB+ modes. To reset the radio:
Press and hold the Info/Menu button.
Press the Prev or Next button until <Factory reset> is shown on screen, press the Enter button and
<Yes> or <No> is shown on the screen. Use Prev or Next button to select <Yes>.
Press the Enter button and radio will be reset.
Sleep setting
Press the Sleep button.
Press the Prev or Next button to select either OFF-120-90-60-45-30-15-5 minutes.
Press the Enter button to confirm.

Using the alarm

Alarm Setting
With radio on, press Alarm button then press Enter button, OFF will flash on display
Then press the Prev or Next button to choose Alarm 1 to ON position, press Enter button to confirm.
The hours will flash, use the Prev or Next button to select hour. Press Enter button to confirm.
The mins will flash; use the Prev or Next button to select the minutes. Press Enter button to confirm.
The Vol digit will flash, use the Prev or Next button select the Volume. Press Enter button to confirm.
The Alarm source will flash, use the Prev or Next button select the Alarm source: Alarm/DAB/FM.
Press Enter button to confirm.
With radio on, press Alarm button twice to set Alarm 2:
The setting procedure is the same as the "ALARM1".
NOTE: You can press the Info/Menu button to get back last one step when in the process of the
setting the alarm.
Warning: At location with poor DAB reception after power interruption time setting may not recover
and for that wake up by timer could fail.
Deactivate the alarm
With radio on, press Alarm button, and then select the alarm you wish to turn off using the Prev or
Next button to choose the Alarm to OFF position.
Press Enter button.The alarm will be deactivated.
Turning off the alarm
Press the Standby button to turn off the alarm when the alarm is sounding.
NOTE: The alarm will keep ringing for 1 hour if you do not turn it off when it is sounding.
Snooze Function
9