Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
XP208w Controls and Connections
1.
MASTER VOLUME - Used to control
the overall level of the speaker
system.
2.
MASTER TREBLE - Controls the
high-frequency tone of the entire
system.
3.
MASTER BASS - Controls the
low-frequency tone of the entire
system.
4.
CH1 VOLUME - Controls the level
of the Channel 1 Mic/Line input.
5.
LINE / MIC Switch - Adjusts the
gain of the CH1 input for a
microphone or line level device.
6.
CH1 Input - XLR-1⁄4" input for
connecting a microphone or a
device with a line level signal.
7.
CH2 VOLUME - Controls the level
of the Channel 2 input.
8.
LINE / INST Switch - This switch
changes the input of the CH2
1/4" jack to connect line level
devices, to electric instruments
(e.g. guitar) with pickups.
9.
CH2 Input - Connect a line level
device or instrument using a 1/4"
audio cable.
10. CH3 VOLUME - Controls the level
of the two XPD USB wireless inputs.
11. XPD WIRELESS Inputs (2) - Connect Samson XPD digital wireless USB receivers to these
inputs. The wireless receiver gets its power from the XP208w, so no additional power
supply is needed. The USB connector supplies 5V 200mA at of power to charge a small
portable USB device like an MP3 player or smartphone.
12. REVERB - This knob is used to adjust the total amount of reverb added to Channel 1
and Channel 3 (wireless) input channels.
13. LINE OUT - Line level 1/4" output jack to connect the XP208w to the input of a another
XP208w to create a dual mono speaker system. The Line Out signal is before the
MASTER VOLUME and EQ Controls.
14. BLUETOOTH® VOLUME - Controls the level of the Bluetooth input.
15. Pairing Indicator - Displays the Bluetooth status of the XP208w system.
16. PAIR Button - Press this button to enable pairing mode in order to connect to a
Bluetooth audio device.
6
1
4
5
6
9
2
3
14
7
10
12
8
11
13
15
16
17
18
19
20
21
22
Werbung
Inhaltsverzeichnis
