Makita UR180D Betriebsanleitung Seite 7

ENGLISH (Original instructions)
1. Indication lamp
2. Switch trigger
3. Battery cartridge
4. Front grip
5. Clamping nut
6. Lock grip
7. Guard
8. Nylon cutting head
9. Red indicator
10. Button
SPECIFICATIONS
No load speed
Overall length
Cutting diameter with nylon cutting head
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.................. Take particular care and attention.
........ Read instruction manual.
.................. Danger; be aware of thrown objects.
.................. The distance between the tool and
bystanders must be at least 15 m.
.......... Keep bystanders away.
.......... Keep distance at least 15 m.
Explanation of general view
11. Lock-off button
12. Shaft
13. Grip
14. Hex bolt
15. Screws
16. Cutter cover
17. Nylon cord eyehole
18. Notch of the nylon cutting head
installation port
19. Spring
Model
Net weight
D.C.14.4 V Model
D.C.18 V Model
UR140D
6,000 min
1,229 mm - 1,433 mm
260 mm
D.C. 14.4 V
.................. Avoid kickback.
END017-5
.................. Wear safety glasses.
.................. Wear ear protection.
.................. Wear a helmet, goggles and ear
.................. Wear protective gloves.
.................. Wear sturdy boots with nonslip soles.
.................. Do not expose to moisture.
.................. Top permissible tool speed.
20. Spool holder
21. Nylon cord
22. Retainer for nylon cord end
23. Spool
24. Shoulder strap
25. Hook
26. Motor housing
27. Lock button
-1
1,229 mm - 1,433 mm
2.1 kg
BL1413G/BL1415G
BL1813G/BL1815G
DC18WA
protection.
Steeltoed safety boots are
recommended.
UR180D
7,800 min -1
260 mm
2.1 - 2.2 kg
D.C. 18 V
7