Connecting To Electrical Mains - Hansa BHI68320 Bedienungsanleitung

INSTALLATION

Connecting to electrical mains

Important!
Electrical connection must be made by a properly certified qualified installer. Do not
make any alterations or changes in the appliance electrical system.
Tips for the installer
The hob is equipped with a terminal block allowing different connections appropriate for a
specific type of power supply.
Terminal block allows the following connections:
• Single-phase 220-240V~
• Three-phase 380-415V 3N ~
Important!
Remember to connect the neutral lead to correct terminal block clamp, marked
with . The electrical system supplying the hob must be protected by a properly
selected tripping device or a circuit breaker allowing to disconnect the power supply
in an emergency.
Before connecting to the appliance, please carefully read the information provided on the
rating plate and wiring diagram.
IMPORTANT! The installer is obliged to provide the user with „appliance electrical connection cer-
tificate" (enclosed with the warranty card).
Connecting the hob other than shown on the wiring diagram may damage the hob.
32