Special Wash Cycles And Options - Hotpoint Ariston LTF 11M121 Gebrauchsanleitung

Special wash cycles
and Options
Notes:
Optimum performance levels when using the "Fast" and "Express
30'" cycles can be achieved by respecting the specified number
of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: for information on comparative EN
testing conditions, please send an email to the following address:
assistenza_en_lvs@indesitcompany.com
Wash options
If an option is not compatible with the selected wash cycle
(see table of wash cycles), the corresponding LED flashes
rapidly 3 times and beeps will sound.
Delayed start Option
The start of the wash cycle may be delayed for a
period of time between 1 and 12 hours.
1. Press the DELAYED START button: the corresponding
symbol appears on the display; each time you press the
button, the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the cycle and close the door: the timer will begin
counting down;
3. Once this time has elapsed, the indicator light switches off
and the wash cycle begins.
To adjust the delay time and select a smaller period of time,
press the DELAYED START button. To cancel it, press the
button repeatedly until the selected delayed start indicator
light switches off. The wash cycle will start automatically as
soon as the door is shut.
The DELAYED START function cannot be set once a wash
cycle has been started.
ACTIVE OXYGEN
This device releases ozone molecules into the
dishwasher, i.e. a natural substance that reduces
unpleasant odours.
It should be used between two different wash cycles and
ONLY after soiled crockery has been loaded.
To start the ACTIVE OXYGEN option press and hold the button
O
The option will stay active either for 24 hours or until the
3
wash cycle is started. More items can be introduced at any
time until full load.
The typical faint odour that can be smelt inside the dishwasher
- the same as you sometimes get with storms - is due to the
ozone produced by lightning discharges. This is normal. The
device produces just a small quantity, which soon decays.
No replacement needed.
All manuals and user guides at all-guides.com
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button; the corresponding indicator
light/symbol will light up. If the button is pressed again, the
option will be deselected.
wash cycle.
and then press the ZONE WASH button: the selected rack
lights up and the wash cycle starts in the selected rack only.
Press the button again to deselect the option.
The option is available with the following wash cycles:
Intensive and Normal.
Select the option and the Intensive cycle to start the
ULTRAINTENSIVE ZONE washing. This wash cycle is ideal
for very soiled mixed loads, e.g. pans and saucepans, dishes
with heavy encrustation or difficult-to-clean crockery (grater,
vegetable mill, dirty cutlery). The spraying pressure is stronger
and the washing temperature higher, thus ensuring optimum
handling of stubborn stains.
Select the option and the Normal cycle to start the SAVING
ZONE washing. This function makes it possible to reduce
energy consumption. Cycle duration might change.
Remember to load the crockery in the selected rack only
the EXTRA DRYING button and the indicator light/symbol will
light up. If it is pressed again, the option will be deselected.
A higher temperature during the final rinsing and a longer
drying phase improve the dryness level.
the wash cycle.
*
Only available in selected models.
Multi-functional Tablets Option (Tabs)
This option optimises washing and drying results.
The "Multi-functional tablets" option results in a longer
Zone Wash Option
This option makes it possible to carry out the wash
cycle in the selected rack only. Select the wash cycle
Extra drying Option
To improve the dryness level of the crockery, press
The EXTRA DRYING option increases the duration of
EN
33