DeWalt DWS520KTR Bedienungsanleitung Seite 29

DWS520 PLUNGE SAW
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.
Technical data
Voltage V
DC
Power W
No-load speed min -1
Blade diameter mm
Maximum depth of cut
90˚ (without guide rail) mm
90˚ (with guide rail) mm
Blade bore mm
Bevel angle adjustment
Weight kg
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
L (sound pressure)
pA
K (sound pressure uncertainty) dB(A)
pA
DWS520 DWS520
L (acoustic power)
WA
QS/GB LX
K (acoustic power uncertainty) dB(A)
WA
220-240 115
1300 1300
Vibration total values (triax vector sum)
1750-4000 1750-4000
determined according to EN 60745:
165 165
DWS520
59 59
55 55 The declared vibration emission value has been
measured in accordance with a standard test
20 20
method and may be used for comparing one tool
47˚ 47˚
with another.
5 5
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
10 Amperes, mains
13 Amperes, in plugs
An estimation of the level of exposure to vibration
experienced during a given period of work should
also take into account the times when the tool is
switched off and when it is running idle in addition to
the trigger time.
This may significantly reduce the exposure level over
the total working period.
EC-Declaration of conformity
DWS520
D WALT declares that these tools have been
E
designed in compliance with:
2006/95/EC, 98/37/EC, 2004/108/EC,
EN 60745-1, EN 60745-2-5, EN 55014-1: 2006,
EN 55014-2:1997 + A1:2001, EN 61000-3-2: 2006,
EN 61000-3-3: 1995 + A1: 2001.
Denotes risk of fire.
DWS520 DWS520
QS/GB
dB(A 92
3
dB(A) 103
3
Vibration emission value = 2.8 m/s²
Uncertainty K = 1.5 m/s²
WARNING: The vibration emission
value during actual use of the power
tool can differ from the declared value
depending on the ways in which the tool
is used. This could lead to a significant
underestimate of exposure when the
tool is used regularly in such a way.
EN GL IS H
LX
92
3
103
3
25