Input Limits; Definition Of Symbols - Multimetrix CM604 Bedienungsanleitung

„ Use personal protection equipment systematically.
„ All troubleshooting and metrological checks must be done by competent, accredited personnel.

1.2. INPUT LIMITS

Function
Voltage AC or DC
Frequency, Resistance, Capacitance, Continuity, Diode Test, Temperature
Current AC

1.3. DEFINITION OF SYMBOLS

WARNING, risk of DANGER! The operator must refer to these instructions whenever this danger
symbol appears.
WARNING, risk of electric shock. The voltage applied to parts marked with this symbol may
be hazardous.
Equipment protected by double insulation.
Information or useful tip.
The product is declared recyclable following an analysis of the life cycle.
The CE marking indicates compliance with the European Low Voltage Directive (2014/35/EU),
Electromagnetic Compatibility Directive (2014/30/EU), and Restriction of Hazardous Substances
Directive (RoHS, 2011/65/EU and 2015/863/EU).
The UKCA marking certifies that the product is compliant with the requirements that apply in the
United Kingdom, in particular as regards Low-Voltage Safety, Electromagnetic Compatibility, and
the Restriction of Hazardous Substances.
The rubbish bin with a line through it indicates that, in the European Union, the product must
undergo selective disposal in compliance with Directive WEEE 2019/19/EU. This equipment
must not be treated as household waste.
Definition of measurement categories
„ Measurement category IV corresponds to measurements taken at the source of low-voltage
installations.
Example: power feeders, counters and protection devices.
„ Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices
„ Measurement category II corresponds to measurements taken on circuits directly connected to
low- voltage installations.
Example: power supply to electro-domestic devices and portable tools.
13
Maximum Input
600V AC/DC
600V AC/DC
400A
Battery.
Fuse.