Battery Type; Package Contents; Description (Fig. A); Intended Use - DeWalt FLEXVOLT DCS520NT-XJ Originalanweisungen

EnGLIsh
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other than
e
the designated D
e
charger may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The DCS520 operates on a 54 volt battery pack.
The DCB546, DCB547, DCB548 battery packs may be used. Refer
to Technical Data for more information.

Package Contents

The package contains:
1 Plunge saw
1 Hex wrench
1 Li-Ion battery pack (T1 models)
2 Li-Ion battery packs (T2 models)
3 Li-Ion battery packs (T3 models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
38
WALT batteries with a D WALT
e
Wear ear protection.
Wear eye protection.
Maximum depth of cut
Blade diameter
Date Code Position (Fig. A)
16
The date code , which also includes the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture

Description (Fig. A)


WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1 Plunge trigger
2 On/off switch
3 Main handle
4 Shoe
5 Rail adjustment knobs
6 Bevel scale
7 Bevel adjustment knobs
8 Depth adjustment knobs
9 Depth scale
10 Blade
11 Front handle
12 Spindle lock button
13 Spindle lock lever
14 Battery pack
15 Battery release button
16 Date code
17 Dust extraction outlet
18 Anti-kickback knob
19 Speed wheel
20 Fuel gauge

Intended Use

The DCS520 cordless plunge saw is designed for professional
sawing of wood products.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This heavy-duty plunge saw is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.